RIO's heat shrink welding tubing enables anglers to quickly and easily weld loops in the ends of InTouch Level T sinking material.
RIO Welding Tubing compliments the InTouch
level “T” sinking material, allowing anglers and
fly shops to customize the length of each sink
tip by welding a loop in the end. The Level “T”
Welding Tubing is a heat-shrink tubing that sits
over a doubled-back fly line to allow for an easy
welded loop to be performed. There are two sizes
of tubing available, “Regular” and “Large”.
The Regular tubing has an internal diameter of 1/16th of an inch and is great for T11 and smaller, while the Large tubing has an internal diameter of 3/32nds of an inch, and best for T14 and larger. Both tubes shrink to approximately 50% of their original size.
Both sizes of tube are available in two quantities: The “Pack” has 20 pieces of 6” tubing, while the “Bulk” pack contains a 50 ft coil of tubing.
Level T Welding Tubing - All Models
|20 x 6" tubes||Regular Pack|
|1 x 50ft coil||Regular Bulk|
|20 x 6" tubes||Large Pack|
|1 x 50ft coil||Large Bulk|